Printed Instructions

Written by Administrator | 17 October 2009

FITTING INSTRUCTIONS FOR PABS^©:

Step 1.  Begin by removing your new Pet Anti-Breeding System from the packaging.  Notice the system is made of three pieces—the collar(unit #1), the back strap(unit #2), and the Sani-T Pad^™ pocket(unit #3).

Step 2.  Standing behind the pet, unfold the Sani-T Pad^™ pocket(unit #3), laying it flat and positioning it with the cross straps closest to you.

Step 3.  Position the pet on the opposite side of the waist belt, with its head away from you and its backside close to the waist belt.

Step 4. Gently place the pet’s hind legs inside the two loops between the waist belt and sanitary pad pocket.  Secure the waist belt around the pet’s waist.  Ease the tail through the cross straps nearest you.

Step 5.  Place the collar(unit #1) around the pet’s neck, using the back strap(unit #2) to attach the collar to the Sani-T Pad^™  pocket(unit #3).  Make all necessary adjustments for a loose, comfortable fit.

 THE PET ANTI-BREEDING SYSTEM IS IN PLACE AND YOUR PET IS NOW PROTECTED!

 Warning: PABS^© should never be fitted too tightly on your pet, as this could cause her to chew/bite the webbing, which may result in damage to the system, and ultimately rendering it unfit for use.